PRODUCT DESCRIPTION
Automatic flap barrier turnstile offers a reliable and efficient method to ensure only authorized users are allowed access to each area of a building. A direction indicator, showed that pedestrian access to the current status of, and guide pedestrian correct and smooth passage. The flap barrier, can be integrated for every access control system, such as facial recognition device, fingerprints, QR reader, RFID systems etc.
Access control integration
Can be integrated with all kinds of access control systems. Anti-punch, the barrier will not close if it detects people inside the passageway. Anti-tailgating, it allows only one person to pass for an authorized card presented.
SINOMATIC PRODUCT ADVANTAGES
•Reliable mechanism with powerful BLDC gear motor ensures long term maintenance-free operaon;
•Flap barrier equipped with smart self-diagnosng system;
• Digital control of force and leaf speed in combinaon with safety sensors prevent person from being struck by a leaf, even in case of an unauthorized passage;
• Sensor system allows detecng the passage of person with luggage, or arranging a free exit without the need for idenficaon;
• Elegant cabinets equipped with integrated LED lighng showing access status and card reader area
• Same dimensions of cabinet for normal (550 mm) and wide lane (900 mm)
•The ability to customize housing design and top lid;
•Low power consumpon;
• Can be integrated with any type of access control systems;
• In case of power failure, leaves could be opened manually (fail-safe).
TECHNICIAL SPECIFICATIONS
| Item | value |
| Place of Origin | China |
| Size parameters | 1200 * 300 * 980mm(default) |
| Case material | 304 stainless steel |
| Wing material | PU foam soft baffle Or acrylic baffle (optional) |
| Wing colors | blue, red, transparent to choose from |
| Channel width | ≤ 600 MM |
| Wing length | 270mm |
| Traffic speed | 30-35 people/minute |
| Unlocking time | 0.2S |
| Input voltage | 100-240V, 50/60HZ |
| Drive voltage | 24V |
| Travel direction | one-way or two-way |
| Light prompt | directional arrow indication for passage |
| Opening signal input | dry contact |
| Working environment | indoor and outdoor (with shelter) -20 ℃~60 ℃ Relative humidity: ≤ 90%, non condensing |
| Normal service life | 10 million times |
MAIN FUNCTION AND FEATURES
1. Fault detection and alarm functions, easy to use and maintenance.
2. The running status can be programmed and controlled with the built-in keyboard on the main board.
3. Mechanical anti-pinch function. If the gate meets resistance in the reset process, motors will stop
working automatically within the prescribed time and reset again after the default delay (till fully reset).
4. Anti-breakthrough function. The gate is locked automatically until opening signal received.
5. Synchronization functions (for dual gate equipment).
6. Automatic reset function. Should the user fail to pass within the prescribed time (default time is 5 seconds),
the system will cancel the authority of the current user automatically.
7. Gate can be set as normally open or normally closed.
8. Can be used with variety of card readers: IC / ID card readers, bar codes, fingerprints, etc. (Access controller needed).
9. Direction can be set as single-direction or bi-direction.
10. LED direction indicator.
11. Gate auto opens when power off and auto close when power on, complying with fire safety requirements.
12. Alarm function, in case of illegal intrusion and reverse intrusion, etc.
13. Counter function (optional).
14. Support infrared photocell for anti-pinch and reset function.
FLAP BARRIER APPLICATION
- Banks, insurance companies
- Governmental and institutional establishments
- Office buildings, registered offices, administrative sites...
- Schools, universities and colleges
- Sensitive sites : military, nuclear, pharmaceutical, computer centers...
- Airports
