Shenzhen Original Manufacturer Smart Parking Barrier Vehicle Loop Detector For Access Control System

Product description

PD132 single loop detector is used for wherever vehicles have to be detected , for example for monitoring and

safe-guarding access ways or for counting vehicles. The output signal can be used for controlling door and gate

drive mechanisms, operating barriers, controlling traffic light systems or activating card dispensers in parking lots .

It's widly used in the below applications:

Automatic Gate
Traffic Light System
Gate Drive Mechanisms
Operating Barriers
Parking Guidance System
Activating Card Dispensers in Parking Lots

Main Features

1. The accuracy of speed measurement and traffic volume is high.
2. The work stability is good.
3. It is not affected by changes in meteorological and traffic environment.
4 Industrial grade design
5. sensitivity levels adjustable.
6. Supports multi output ports
7. Fault self detected function
8. Realized barrier close automatically after car pass.
9. Supports OEM and ODM

PRODUCT INSTALLATION

The detector must be installed in a convenient weatherproof location as close to the loop as possible. Installation

location must choose to stay away from the heat source, it around other devices must maintain a distance of at least

10mm (mustn’t fix cling to the cabinet). A correct loop configuration and detector installation will ensure a successful

inductive loop detection system. Loop of several important parameters include: loop figure, size, and turns, install

methods (details as “Loop installation guide”).

Work indicator

Detector will enter into the self-calibration condition with the green LED flash, red LED extinguish once on power,

this procession will last 1 second. .the vehicle should not on the loops within the self-calibration. The green LED will

not flash, he red LED extinguish after self-calibration. When the vehicle past over the loop ,the red LED on.

Operation and Indication

While the detector is tuning, the green Channel LED and red Power LED will be turn on. It remain about 2 seconds,

then the green LED turn off. If a loop fault exists the Channel LED will come on and flash indicating a fault. If the fault

is self-healing the detector will continue to operate. The green channel LED will also glow whenever a vehicle is

detected passing over the inductive loop. The red Power LED at the top of the unit will remain on to indicate that the

unit is powered.

Frequency

To eliminate interference of two neighbouring wire loops or loop detectors, the frequency can be altered.

Sensitivity

The sensitivity of the detector allows the detector to be selective as to the change of inductance necessary to produce

an output. There are four sensitivity selections and are set as follows by DIP3 and DIP4 Switch.

Founded in 2002, SINOMATIC is a national high-tech enterprise specialized in R&D，production, and sales of intelligent access control products. It has nearly 200 patented technologies. Its main products including Access control turnstile, parking barrier gate/parking lock, Automatic gate opener, Anti-terrorism roadblock, etc., are suitable for the entry and exit management of vehicles and personnel such as government building, high-speed toll gate, commercial plaza, residential areas, stations, customs checkpoints, etc.

SINOMATIC has strong innovation and R&D capabilities, ultra-high technology, and craftsmanship, leading the industry into the era of intelligent variable speed interconnection.

As an innovative enterprise, SINOMATIC has always been committed to building an efficient and innovative R&D team to continuously promote technological and product innovation, improve the core competitiveness and market share of the enterprise.

At the same time, SINOMATIC attaches great importance to the construction of the talent team and focuses on introducing and cultivating high-quality R&D personnel in the field of research and development.

Technological innovation, product quality, and manufacturing capabilities are the driving force of SINOMATIC's continuous development. Brand, channels, and after-sales service are the pillars of SINOMATIC's long-term development. SINOMATIC products are sold all over the world. It has set up agency service outlets in more than 150 countries and regions including United States, Canada, UK, France, Germany, Russia, India, Singapore, Malaysia, Indonesia, Thailand, Turkey, Israel, UAE, Saudi Arabia, South Africa Nigeria, Kenya, etc.

With superior product quality and a high-quality after-sales service system, "SINOMATIC" has become a world-renowned brand of Access control products. SINOMATIC always keeps forging ahead, makes every product with hearts, and adheres to build trustworthy SINOMATIC quality and Chinese national brand in the world.