Automatic Remote Control Steel Gear Rack Driven Waterproof 600 800
1000 KG SL600AC Sliding Gate Opener
Product description
SL600AC(gear drive)---operates by forcing a drive rack by a drive
gear, will handle gate weighting up to 600kg.
Standard unit includes: SL600AC gate motor+control board+2 pcs
remote control+one manual release key+installation manual.
ADVANCE FEATURES
Compact structure, cost-effective.
Built in control board
Keypad / single button interface.
Alarm lamp, Photo beam & safety beam interface.
User can select auto-close function.
Optional for spring limit switch and magnetic limit switch
Manual key release design for emergency purposes.
Automatic stop when hitting obstacle during opening, auto-reverse
when hitting obstacle during closing. (Smart version)
MAIN FEATURES
1. AC motor with built-in control unit
2. Keypad/single button interface
3. Alarm lamp, photo beam and safety beam interface
4. User can select auto-close function
5. Soft start and slow stop(smart version, optional)
6. Auto-reverse function when hitting obstacle during closing(smart
version, optional)
7. Manual key release design for emergency power failure
8. Gear driven with built-in control board.
9. RF Hopping Code Technology prevents your remote code from being
accessible to others.
10. This powerful sliding gate operator can open gates that are up
to 8 meter long and weigh 600KG.
11. The remote control has 4 buttons, corresponding to
open/close/stop.
12. You can add up to 23 extra remotes that can control this
system.
13. In case of a power outage or an emergency you may also use
manual release key.
Technicial specifications
| Type | SL600AC | SL600ACU |
| Power supply | 220V, 50Hz | 110V, 60Hz |
| Motor speed | 55rpm | 66rpm |
| Rated output power of motor | 280W |
| Remote control operating distance | 30m (Frequency:433.92mHz) |
| Output shaft height | 58.5mm |
| Max. gate weight | 600Kg |
| Output torque | 16N·m |
| Limit switch | Spring (mechanical) / magnetic |
| Noise | ≤58dB |
| Duty cycle | S2, 15 minutes |
| extra remote control | 20 |
| Environmental temperature | -20°C~+50°C |
| Gate Move speed | 11m/min | 13m/min |
Optional Accessaries
- Metal Gear Rack & Nylon Gear Rack are optional, you can order the
rack length accordig to your gate length;
- Photo beam sensor;
- Keypad systems;
- Push button;
- Warning light;
Installation
SL600AC sliding gate opener is applicable to gate weight less than
600kg, and length of the sliding gate less than 12m. The drive mode
adopts the rack and gear transmission. This gate opener must be
installed inside the enclosure or yard for protection.
Installation procedures
Preparation work before installation
Please make sure that the sliding gate is correctly installed, the
gate rail is horizontal, and the gate can be manually moved
smoothly before installing the gate opener.
Cable installation
In order to guarantee the normal operation of the gate opener and
protect the cables from damages, please bury the motor & power
cable and controlling cable separately with two PVC tubes.
Concrete pedestal
Please precast a concrete pedestal with the size can be 400mm x
250mm, depth be 200mm in advance, so as to firmly install SL600AC
gate opener. Please make sure the distance between the gate and
gate opener is appropriate before casting the pedestal.
FOR MORE DETAILS, PLEASE CLICK THE BELOW LINK TO DOWNLOAD THE USER
MANUAL.
SL600AC
user manual.pdf
